Printer 3D Printer Top 10 Best 500Mm 3D Printer of 2022

Top 10 Best 500Mm 3D Printer of 2022

There are many 3D printers on the market, but the best 500mm 3D printer is the Ultimaker 3. This printer is great for large prints, and it is also one of the most affordable printers on the market.

The Best 500mm 3D Printer in the Middle

This is a great 3D printer if you want to start printing objects on a larger scale. It has a 500mm print width which is great for printing large objects. The build volume is also very large, so you can print things that wouldn’t fit on other printers.

Table of Contents
  1. The Best 500mm 3D Printer in the Middle
  2. Frequently Asked Questions
  3. How To Unclog 3D Printer Nozzle
  4. What 3D Printer Filament Should I Use
  5. Where Can I Use A 3D Printer
  6. What To Do With 3D Printer

10. Kingroon 3D Printers, Premium Titan Extruder Aluminum Double Linear Guide Rails and Double Cooling Fans, Easy Assemble Printing Space 180x180x180mm

Kingroon 3D Printers, Premium Titan Extruder Aluminum Double Linear Guide Rails and Double Cooling Fans, Easy Assemble Printing Space 180x180x180mm

The easy assembly printer is perfect for those who want an easy and quick assembly process.

Almost all of the printer is preassembled, making it very easy to setup.

Additionally, the printer has dual rails, which allows for higher printing accuracy and long life service.

The printer also has cooling fans, which help to dissipate high heat levels evenly, resulting in a more smooth printing process.

Finally, the printer has a printing voice that is low in volume, making it perfect for those who want to get more fun out of their printing time.

BrandKingroon
MaterialAluminum
ColorKP3L
Item Weight7 Kilograms
Operating SystemWindows, Mac

9. Voxelab Aries FDM 3D Printer, Industrial Grade Open Structure, High Precision Dual Z-axis Rail Extruder, 4.3inch Touch Screen,WiFi Printing and Resume Printing Function, Print Size: 7.87×7.87×7.87inch

Voxelab Aries FDM 3D Printer, Industrial Grade Open Structure, High Precision Dual Z-axis Rail Extruder, 4.3inch Touch Screen,WiFi Printing and Resume Printing Function, Print Size: 7.87x7.87x7.87inch

The voxelab aries 3d printer is pre-assembled, just simple bits of assembly for quick start-up, set up and within minutes after some small manual assembly.

By wifi printing and touch screen, you could start your first printing quickly.

the alloy frame and dual z-axis rails not only ensure the stability during printing but also greatly extend working life.

The optimization and cooperation of overall structure ensure the sustainable and efficient operation.

with auto filament loading/unloading function.

The aries stops printing and notify you on screen when filament running out or other issues happened, recover printing when the issue fixed.

with better flatness, carbon silicon crystal glass platform can be heated up equably in short time.

It provides a strong adhesion, so the printing model will not easily become warped.

all voxelab 3d printers are provided lifetime technical assistance and 12-months warranty.

Quick response in 24 hours.

BrandVoxelab
MaterialGlass
Item Dimensions LxWxH15.98 x 16.69 x 18.46 inches

8. CREALITY Official 3D Printer CR-6 SE Upgraded Auto Leveling Silent Motherboard Easy Assembly Dual Z-axis and Meanwell Power Supply Large 3D Printer 235 x 235 x 250mm

CREALITY Official 3D Printer CR-6 SE Upgraded Auto Leveling Silent Motherboard Easy Assembly Dual Z-axis and Meanwell Power Supply Large 3D Printer 235 x 235 x 250mm

The cr-6 se designed with intelligent leveling-free system,can automatically adjust the uneven hotbed during printing and effectively solve the problems of uneven bed,nozzle clogging and poor adhesion.

Truly achieve one-click leveling and easy printing.

Perfect for 3d printing beginners and professionals.

ultra silent motherboard equipped with a self-developed 32-bit silent motherboard and the latest tmc2209 driver.t

Hey feature stronger anti-interference,more precise voltage control and more silent printing motion,making the entire printing smoothly, quietly and precisely.

It will not disturb you and your family to work, study and rest.

reliable extruder + z-axis double screw the newly designed extruder with a clip and fixed case, makes the filament feeding more easily and reduce tangles.

The z-axis double screw improves the printing stability.

filament detector and power resume printing cr-6 se can intelligently detect the filament and stop printing when filament run-out or broken, then resume printing when new filament feed in.

Besides, with a built-in battery, it features power resume printing function too.

Saving time, energy and filaments waste,enjoy your 3d printing time.

BrandCREALITY
MaterialPolylactic Acid
ColorCR-6 SE
Item Dimensions LxWxH17.4 x 18.19 x 21.26 inches
Item Weight9.5 Kilograms

7. Official Kywoo Tycoon 2.0 3D Printer,Featuring a Direct Drive extruder,32-bit Motherboard Ultra-Quiet Industrial Grade 3D Printer, Linear Guide, Auto Leveling Sensor, Print Size 240 x 240 x 230mm

Official Kywoo Tycoon 2.0 3D Printer,Featuring a Direct Drive extruder,32-bit Motherboard Ultra-Quiet Industrial Grade 3D Printer, Linear Guide, Auto Leveling Sensor, Print Size 240 x 240 x 230mm

Kywoo’s newly designed double gantry structure makes the machine more stable and accurate.

Double z-axis and double y-axis polishing bars for faster movement and more accurate printing results.

Sturdy linear guide structure with super silent effect, more accurate movement and better wear resistance during long-term printing.

Printing size 240 240 230mm with .1mm accuracy.

Brings you industrial grade performance.

Smarter 3d printing with the latest 32-bit tmc2208 motherboard, ultra-fast running speed, and also supports the latest firmware upgrade.

Wifi function allows you to control the machine remotely with the slicer software.

Wifi function allows you to control the machine remotely with the latest slicer software.

Instructions for using the wifi function are included in the included sd card.

It also has the latest auto leveling function, resume printing function, filament detection function.

BrandKywoo3D
MaterialAbs, Pla, Tpu
Item Dimensions LxWxH22 x 20 x 11.8 inches
Supported File FormatOBJ, STL, AMF
Operating SystemLinux, Windows XP, Windows, Mac

6. Creality Ender 7 3D Printer 250 mm/s High-Speed Printing with High Precision Linear Rail Core XY Structure, Dual Cooling Fans, FDM 3D Printers Printing Size 9.84×9.84×11.8 inch (Ender 7)

Creality Ender 7 3D Printer 250 mm/s High-Speed Printing with High Precision Linear Rail Core XY Structure, Dual Cooling Fans, FDM 3D Printers Printing Size 9.84x9.84x11.8 inch (Ender 7)

Advanced technology, large print size, easy assembly, and powerful performance make creality ender-7 a great choice for your next 3d printer.

BrandCreality 3D
MaterialSilicon carbide, Metal
ColorEnder 7
Item Dimensions LxWxH16.93 x 18.11 x 22.44 inches
Item Weight17.2 Kilograms

5. Voxelab Aquila FDM 3D Printer Machine, with Removable Carborundum Glass Plate, Resume Printing and Fully Open Source, DIY 3D Printer Kit for Kids/Adults/Beginner, Build Volume 220x220x250mm

Voxelab Aquila FDM 3D Printer Machine, with Removable Carborundum Glass Plate, Resume Printing and Fully Open Source, DIY 3D Printer Kit for Kids/Adults/Beginner, Build Volume 220x220x250mm

The voxelab aquila 3d printer is perfect for the beginner 3d printer maker.

The aquila is an open source 3d printer that offers a print volume of 220 x 220 x 250 mm, guaranteeing dimensional accuracy of 0.2mm and a layer thickness of 0.007in.

The carborundum glass heated bed platform is strong adhesion and uniform heating, with a 2-3 minute heat up time and the ability to keep the bed at an optimal temperature above the heated bed, to prevent prints from warping.

The aquila also has an intelligent backup system that will automatically create a save point when interrupted in the middle of a print, allowing you to resume the print progress as soon as the power returns.

The printer is also quick and easy to assemble, with integrated structure and modular design that comes with several pre-assembled parts.

If you have any questions during assembly, please search voxelab on the internet for the installation video.

BrandVoxelab
MaterialGlass
ColorStandard tools kits
Item Dimensions LxWxH18.7 x 18.89 x 18.62 inches
Item Weight18.07 Pounds

4. Creality UW-02 Wash and Cure Station Upgraded 10.1 inch Washing Curing 2 in 1 Machine for Resin 3D Printer Rotary Turntable Bucket 9.5×6.3×7.9 inch LCD SLA Models Dual-Band UV Lamp Bead Strip 360°

Creality UW-02 Wash and Cure Station Upgraded 10.1 inch Washing Curing 2 in 1 Machine for Resin 3D Printer Rotary Turntable Bucket 9.5x6.3x7.9 inch LCD SLA Models Dual-Band UV Lamp Bead Strip 360°

Magnetic large fan blade to improve cleaning power.

Super large vortex high-speed cleaning to remove excess resin.

Two modes of cleaning to meet your needs.

BrandCreality
MaterialResin
Item Dimensions LxWxH0.01 x 0.01 x 0.01 inches
Operating SystemWindows 7
Compatible MaterialResin

3. Official Kywoo Tycoon 2.0 3D Printer,Featuring a Direct Drive extruder,32-bit Motherboard Ultra-Quiet Industrial Grade 3D Printer, Linear Guide, Auto Leveling Sensor, Print Size 240 x 240 x 230mm

Official Kywoo Tycoon 2.0 3D Printer,Featuring a Direct Drive extruder,32-bit Motherboard Ultra-Quiet Industrial Grade 3D Printer, Linear Guide, Auto Leveling Sensor, Print Size 240 x 240 x 230mm

Kywoo’s newly designed double gantry structure makes the machine more stable.

Double z-axis and double y-axis polishing bars for faster movement and more accurate printing results.

Sturdy linear guide structure with super silent effect, more accurate movement and better wear resistance during long-term printing.

Printing size 240 240 230mm with 0.1mm accuracy.

Brings you industrial grade performance smarter 3d printing with the latest 32-bit tmc2208 motherboard, ultra-fast running speed, and also supports the latest firmware upgrade.w

Ifi function allows you to control the machine remotely with the slicer software.w

Ifi function allows you to control the machine remotely with the latest slicer software.

Instructions for using the wifi function are included in the included sd card it also has the latest auto leveling function, resume printing function, filament detection function ….

Out of the box 3 steps to set up kywoo tycoon 3d printer, you only need to connect four wires and four screws in minutes, not only meet the expert user’s need for quick assembly, but also friendly to beginners, the rigid metal frame can minimize vibration and improve print quality wide compatibility kywoo tycoon max 3d printer supports pla, tpu, petg, abs and hips filament, comp

BrandKywoo3D
MaterialAbs, Pla, Tpu
Item Dimensions LxWxH22 x 20 x 11.8 inches
Supported File FormatOBJ, STL, AMF
Operating SystemLinux, Windows XP, Windows, Mac

2. Official CREALITY Ender 3 S1 3D Printer with CR Touch Auto Leveling, High Precision Z-axis Double Screw, Removable Build Plate, Beginners Professional FDM 3D Printer 8.66″(L) x 8.66″(W) x 10.63″(H)

Ender 3 s1 is the most outstanding high-precision printing machine on the market.

It adopts dual z-axis to avoid the printing deviation of single-axis printing and increase the accuracy and stability of printing.

Proximal extruder ender 3 s1 adopts a self-developed proximal extruder to ensure smooth extrusion of filaments, sufficient discharge, and improved stability.

From filaiments to extruder, straight line extrusion, fast and smooth.r

Educe the folding and breaking of filaments.

Easy 4-steps installation 90 factory pre-installed solves the problem that the printed product cannot be removed from the print bed, which greatly saves your time and cost.

BrandCreality 3D
MaterialMetal
ColorEnder 3 S1
Item Weight9.1 Kilograms
Supported File FormatOBJ, STL, AMF

1. Voxelab Proxima 8.9 Pro Resin 3D Printer 4K Monochrome LCD Screen 3840×2400, Enhanced Version Matrix UV LED Light Source with 3.5″ Color Touch Screen, Dual Z-axis Large Printing Size 192x120x200mm

Voxelab Proxima 8.9 Pro Resin 3D Printer 4K Monochrome LCD Screen 3840x2400, Enhanced Version Matrix UV LED Light Source with 3.5

The voxelab proxima 8.9pro mono screen is a 4k resolution printer with a 47um xy masking lcd.

The screen has a superior quality that enables a much longer service life than competitive products.

The dual linear guide structure makes the printing process more stable, and the 405nm wavelength uv light source ensures accurate printing with an xy resolution of 47um.

The fast cooling fan ensures the stable operation of the machine, and the larger print volume allows you to print larger models.

BrandVoxelab
MaterialResin
ColorProxima 8.9Pro
Item Dimensions LxWxH11.02 x 9.45 x 18.9 inches
Item Weight26 Pounds

Frequently Asked Questions

How to filter 3d printer?

There is no one answer to this question as the best way to filter a 3D printer depends on the specific printer and filtration needs. However, some tips on how to filter a 3D printer include using a filter cartridge or filter box, using a pleated filter, or using a prefilter.

How much is a 3d printer for home?

A 3D printer for home can cost anywhere from $500 to $5,000.

How to make silicone molds with 3d printer?

There are a few ways to make silicone molds with a 3D printer. The most common way is to use a polyurethane casting resin. You can also use a silicone printing material, like Smooth-On’s SLA-100 Silicone Liquid Polymer. You can also make silicone molds using a two-part silicone molding compound. First, mix the two ingredients together and pour the mixture into the desired mold. Second, heat the mold until the silicone becomes firm and then remove the mold from the heat.

Can 3d printer filament go bad?

It is possible for 3D printer filament to go bad, but it’s rare. If you experience problems with your printer, it’s best to contact the manufacturer for support.

What is a fdm 3d printer?

A 3D printer that prints in three dimensions.

How To Unclog 3D Printer Nozzle

If you’re having trouble printing due to an obstruction in the nozzle, there are a few things you can do to clear it.

First, make sure the printer is properly calibrated and that the extruder is heating up properly. If the extruder is not heating up, it may be due to a clogged nozzle. To clear the nozzle, start by printing a small test piece and examining it closely. Is there a clog of some sort? If so, it will likely be located in the center of the nozzle. Use a syringe to remove the obstruction and clear the nozzle. Be careful not to hit the hot extruder nozzle with the syringe! After clearing the nozzle, print a new test piece and see if the problem persists. If not, the clog may have been caused by something else and you’ll need to take it to a technician.

If the problem persists, take your printer to a technician. Most 3D printers use a heated nozzle to print objects. If the nozzle is blocked, the printer will not be able to print properly. A technician will be able to clear the nozzle and fix the problem.

What 3D Printer Filament Should I Use

There are a few things to consider when purchasing filament for your 3D printer. The type of printer, the type of filament, and the3D printing software.

The first thing to consider is the printer. Most 3D printers use filaments made of plastic. There are a few exceptions, but most use filaments made of plastic. The type of printer will determine the type of filament that is best suited for it.

The next thing to consider is the type of filament. There are a few different types of filament, each with its own benefits and drawbacks. The most popular type of filament is ABS filament. ABS filament is best for printing with 3D printing software that supports ABS filaments, such as TinkerCAD.

ABS filament is not the only type of filament available. PLA filament is a popular type of filament that is often used for printing with 3D printing software that does not support ABS filaments, such as Cura. PLA filament is also often used for printing objects that are delicate, such as figurines.

The last thing to consider is the 3D printing software. 3D printing software is important because it controls the printer. If you want to print with ABS filament, you need to use 3D printing software that supports ABS filaments. If you want to print with PLA filament, you need to use 3D printing software that supports PLA filaments.

Where Can I Use A 3D Printer

3D printing is a form of manufacturing that uses a printer to create three-dimensional objects from digital models. The technology has been used in a number of industries, including plastic surgery, aerospace, and automotive manufacturing.

3D printing can be used in a variety of industries to create customized parts and products. Some of the most common applications include plastic surgery, aerospace manufacturing, and automotive manufacturing.

In plastic surgery, for example, 3D printing is used to create customized implants and prosthetic limbs. Aerospace manufacturers use 3D printing to create customized parts for aircrafts and spacecraft. And automotive manufacturers use 3D printing to create custom car parts and engines.

3D printing is a versatile technology that can be used in a variety of industries. If you’re looking to create custom parts or products, 3D printing is a great option.

What To Do With 3D Printer

If you’re considering using a 3D printer, it’s important to understand the different types of filament available. Filament is the name given to the material used to print objects with a 3D printer.

There are three main types of filament: ABS, PLA, and Nylon. ABS is made from a plastic derived from a mixture of acrylonitrile butadiene styrene. PLA is made from a plastic derived from polylactic acid. Nylon is a type of filament made from nylon.

Each filament has its own advantages and disadvantages. ABS is the strongest and most durable filament, but it is also the most expensive. PLA is the weakest and least durable filament, but it is the cheapest. Nylon is the weakest and least durable filament, but it is the most flexible.

Related Post